As a kind of fixed firefighting equipment, Portable Fire Fighting Pump has been widely used in firefighting and shunting, especially when there is no power supply or power supply. The products have a wide range of head and flow, which can fully meet the requirements of various occasions of fire water supply for industrial and mining enterprises such as warehouses, wharves, airports, petrochemicals, power plants, liquefied gas stations, textile and so on.
1. Diesel fire pump can also be equipped with other diesel engines as power engines according to the needs of users. It is mainly composed of diesel engine, Fire Pump, connecting device, oil tank, radiator, battery, Portable Fire Fighting Pump intelligent automatic control panel, etc. The whole crankshaft of diesel Fire Pump has high stiffness, high strength and high torque transmission efficiency. Adopt INTERNATIONAL ADVANCED technology AND GANtry block, sliding bearing, plate fin type cooler, heat exchanger, rotary oil filter, double cooling system. Diesel engine fire pump performance is superior, smoke, noise indicators up to table, fuel consumption below the national standard 2.1g/ KW.h above.
2. Diesel engine fire pump has a high degree of automation, with automatic, manual and fault self-test functions, and in the whole process to monitor the working state. It restores the automatic restart function after failure, automatically prelubricates and warms up, and Portable Fire Fighting Pump enables the device to start more safely and reliably. The diesel engine fire pump has remote control and remote control functions in the central control room. It can also have a fieldbus connection. The battery adopts automatic floating charge (constant current, constant voltage, dripping charge) to ensure that the battery is in standby state at any time.
3. The diesel engine Fire Pump can be remotely transmitted to the instrument, and the can be installed and used according to the needs, and connected to the control center for easy maintenance. After the diesel engine fire pump is installed in the machine room, at least 750mm of passage should be left on both sides and in front of the unit for operator inspection and general maintenance. The diesel fire pump has three main functions, which support the quality of the whole unit, ensure that the unit is level and absorbs vibration. The foundation of the unit is made of concrete and the height of the anchor bolts protruding from the horizontal plane should be approximately 2 times the diameter of the bolt.
4. The room with natural ventilation of the diesel fire pump should have large enough ventilation holes and vents, and its location should ensure that there is enough fresh air to supply the diesel engine combustion within the temperature limit. The water radiator takes away the heat from the surface of the circulating cooling water (enclosed) and the diesel fire pump. The exhaust pipe should be connected outdoors. In order to avoid the heat emitted from the exhaust pipe into the room, the exhaust pipe can be wrapped in asbestos material. At the same time, it can also play a role in reducing noise and protecting operators.
Diesel engine fire pump product has the characteristics of good starting, strong overload capacity, compact structure, convenient maintenance, simple use, high degree of automation, is a reliable performance of fire equipment.
Post time: Aug-09-2022