The long-term use of equipment is inseparable from the usual maintenance. There are a large number of precision parts in the fire pump, so it is necessary to maintain it. The following maintenance rules need to be complied with and applied to the actual maintenance:
1, China Portable Fire pump uses the handle tied to the fire pump to lift the pump away from the pipe.
2. China Portable fire pump Turn off the equipment to prevent leakage or sudden start during maintenance.
3. China Portable fire pump Ensure that all the wires on the fire pump have no signs of damage. Poor contact or broken wiring.
4. Remove all parts and clean every part. In order to prevent rust, some parts cannot be cleaned with water.
5. Check the hose to see if there is blockage. Make sure the electric function of fire pump is working properly.
6, once all the parts have been given, good cleaning and inspection of all the cables and wires, reassemble, remove the pump, point the equipment, confirm that the equipment can work normally, and then install it in the original position.
The maintenance work of fire pump, when the pump is not used, can do the maintenance of it, check whether its accessories should be replaced at any time, or whether other lines are normal, if necessary, you can test run for a period of time, observe the situation.
Post time: Aug-03-2022