Fire Fighting Pump Manufacturer The advantages of automation control

Advantages of automatic control of diesel pump

The diesel pump adopts the super-capacity oil tank, which greatly improves the continuous operation time of the generator and reduces the workload of users. Fire Fighting Pump Manufacturer Industrial type oil level indicator, more durable and reliable when used.

Diesel engine water pump panel fittings are made of German Hulsha air switch, safe and reliable. OHV engine is adopted to ensure effective combustion, good combustion economy, small noise and vibration, light weight, small volume, new aluminum alloy self-priming pump body, cast iron impeller/turbine cover, greatly improve the durability of the pump. Diesel engine water pump adopts PF thread of international standard, which has strong versatility, can be configured with different types of water pipes, large flow, high head, stable performance, beautiful appearance, wide range of application, check whether the gasoline in the fuel tank is sufficient; Whether there is oil leakage in fuel valve and oil pipeline.Fire Fighting Pump Manufacturer

https://www.woqfirepump.com/lifan-engine-centrifugal-fire-pump-bj15g-l-product/

Check whether the diesel pump oil level is between the upper limit and lower limit; Check the oil quality and determine whether it needs to be replaced; Check whether the starting battery voltage is above 12V, and observe whether the battery appearance is damaged or leaky; If the generator is not used for a long time, the starting battery will lose power due to self-discharge. Please charge the battery with an external charger. Diesel pump generator set in the first 20 hours after use, should immediately change the oil and machine filter, every 100 hours after use, must change the oil and machine filter, generator set every 100 hours to clean up the air filter element, every 200 hours must be replaced; 3. Check the spark plug gap and clean up the carbon deposit every 100 hours, and replace it every 300 hours.Fire Fighting Pump Manufacturer

The diesel pump control system starts the engine to drive the self-priming pump to pump fluid, convenient and fast. Equipped with lighting system can adapt to night work, is an independent movable, without any auxiliary engineering; Mobile operation, arrive at any time; High displacement or long-distance transport; Single installation operation in a short time; No additional power supply and lifting equipment; No complex maintenance. The diesel pump does not need vacuuming or other auxiliary pumping methods. After the pumping pipe is extended into the required pumping place, the pump can be quickly and directly started to pump and drain water. The assembled mechanical seal is adopted, and the mechanical seal is made of independent lubrication and cooling chamber.

The coarse shaft of the diesel pump is designed without steps, and the diameter is not less than 85 mm. It can reduce the offset and prolong the shaft to ensure that the rotor can run for a long time under the rigid support of the two ends, and the support of the two ends is equipped with mechanical seals to ensure that the bearing does not contact the conveying material. Ensure that the shaft is not offset to reduce the wear of the rotor and related components. Pumping capacity: ordinary plastic bags, textile bags, mud, hair and other sundries can be smoothly pumped through the discharge, will not block the pump body. Diesel engine water pump imported metal frame rubber pipe, export hose, and with quick joints, 4 wheel or 2 wheel alloy steel chassis frame, hard steel insulation cover, and equipped with trailer frame; Control system: use integrated panel centralized control.


Post time: Sep-24-2022