1, The shell of portable pump filter is connected with zero protection, and the leakage protector is installed in the switch box of pump to prevent leakage.
2, the pump should be placed upright, can not be put randomly. When not in use, be sure to cut off the power supply, and the cable can not be pulled casually.
3. Keep the distance between the impeller and the shell, and keep the surrounding of portable Pump filter factory dry.
When using the Portable Pump Filter, safety is essential and requires proper use and safe operation. Perhaps at the beginning of the use of the pump may not be aware of, but if you do not operate well, for a long time, hidden in the pump safety problems once occur, it is difficult to repair the late.
In the use of fire pump should avoid some factors that may lead to its failure, so as to make the use of the pump longer, but also to save pump maintenance costs. Presumably many users also know. How to avoid burning out the pump
1, control the use of fire pump head, turn down the outlet valve, increase the resistance to control the current.
2, water cooling motor leakage out of the water, prevent motor temperature rise caused by burning out.
3, if the delivery of hot water within 80℃, to use a hot water pump, when using, external tap water cooling.
4, if there is no corresponding water leakage sensor, regular maintenance and maintenance of the fire pump to replace the seals.
5. Check whether the power cord is in good contact before use.
If the fire pump is burned out is very dangerous, so it should be necessary to do some checks before using the pump, such as the parts should be changed, the maintenance of the parts and so on. At the same time, pay attention to the timely cooling of easy heating accessories.
Post time: Jun-07-2022