A buy fire pump, a lot of people think of is to open it directly for operation, in fact, it is not right to do so, floating fire pumpand may have some damage to the pump, so before starting the need to do a good job before starting the pump:
1, check the valve switch is what situation, think of some long-term use, or before the fault, more carefully check.floating fire pump
2, if it is found that the valve switch of the fire pump can not be opened at the critical moment of need, there will be safety risks. What we need to do at this time is to check the corresponding valve switch condition. Under normal circumstances, the return valve should be fully opened and the valve group closed.
3, when trying the foam outlet, need to close the fire pump several foam tank valves, they are at the entrance.floating fire pump
4, the clutch handle state, in the “closed” position.
5. If necessary, open the gas switch and close the valve after the reset.
Before starting the fire pump, the first to do the preparatory work, such as the valve situation, as well as the circuit, should be checked in time, must maintain the normal operation of the pump, found fault report in time.
Post time: Jan-31-2023