Portable fire pump Manufacturers will inevitably generate power consumption in the operation process. Although it is inevitable to generate power consumption in order to improve the use efficiency of the fire pump, it is necessary to reduce power consumption if possible in the long term. Portable Fire Pump Manufacturers These tips can help you reduce power consumption.
1. Check whether the impeller of the fire pump is worn, or whether there is friction between it and other accessories. Once there is, repair it immediately.
2, check the liquid density, reduce the liquid density as far as possible.
3, check the bearing, once damaged, repair or replace the bearing immediately.
4, make the coupling in good alignment, adjust the axial clearance.
5, if the fire pump pump shaft bending, can correct the pump shaft.
6. Check the balance hole and dredge the return pipe.
7, check the drive and power supply, control the speed.
8. Relax the packing and check the water seal pipe. Do not allow packing to be pressed or dry rubbed.
Portable Fire Pump Manufacturers When using a fire pump, you can calculate whether there is excessive power consumption, if this situation occurs, you can follow the above mentioned power consumption reduction operation. At the same time, it should be noted that some damaged parts may increase power consumption and need to be disposed of in time.
Post time: May-26-2022