Fire pump models are diverse, in fact, it is not difficult to use correctly, in addition to the correct operation in accordance with the corresponding steps, like its armature composition, also need to understand, the following together to understand its armature composition:
1. Armature winding of fire pump:
(1) The coil is embedded in the armature core groove, and the armature winding of the coil is wound with insulated copper wire and connected with the commutator.Fire Fighting Pump
(2) between the coil and the core, between the upper and lower layers of insulation, pressure, tie.
(3) The conversion of energy is inseparable from the generation of induced electromotive force and electromagnetic torque.Fire Fighting Pump
2. Armature core of fire pump:
(1) Laminated with silicon steel sheet coated with insulating paint, the function is to reduce hysteresis and eddy current loss.
(2) Fire Fighting Pump There are teeth and slots on the surface, which are evenly distributed, and armature windings are embedded in the slots.
(3) constitute the magnetic pathway. Fixed on the rotor bracket or rotating shaft.
Armature for fire pump, can produce electric, speed up the operation of equipment, enhance its operation effect, through the above introduction, we can understand that armature is an important part of the pump.
Post time: Sep-06-2022