Mobile pump station is a collection of microelectronics technology, digital technology, computer technology, information Fire Pump Equipment Manufacturer processing technology, industrial automation control technology, communication technology and mechanical technology as one of the high-tech products. In the process of using the mobile pump station, there are often problems such as improper operation of the equipment. Therefore, the equipment will appear some faults after a period of use. In order to facilitate users to rectify faults in a timely manner, we will introduce some methods.Fire Pump Equipment Manufacturer
1. Work to see that the seat is tight and the tight seat is not a leak.
2. First, let our bodies into the pump, open the pump cover, start the small throttle, engine running, and visible fuel pump internal leakage. If the cylinder piston and underscapular oil plunger can be observed, a small bubble rolling mechanism of oil flow can be observed. The gasket plunger, plunger defect or wear on the blade surface were further studied.Fire Pump Equipment Manufacturer
3. If there is no foam, you should consider the problem of the fuel pump on the side. Allow the user to write into the container of diesel 3-4 kg, remove the fuel pump assembly, in the removal of the hollow screw screwed into the tube fuel pump, fuel pump inlet connected to the pump will block the port, oil, when a person morale, a person into the diesel pressure pump, and will soon be able to find the place of the oil leak. The method has been applied to the head of the pump which can also be tested. Before testing the pump head, the plunger position should be adjustable and armed to stop the oil position, that is, the plunger can be tilted to avoid returning to the hole. Until we know where the leak is.
The above is the mobile pump station failure troubleshooting and solutions, users understand these after the face of a simple fault can also be handled in time.
Post time: Oct-09-2022