How to prevent Portable Fire Fighting Pump from freezing

Some measures should be taken when using Portable Fire Fighting Pump. However, in winter, not only proper measures should be taken, but also anti-freezing and warmth should be more important. Because it is cold in winter and the Pump is easy to freeze in low temperature environment, once the Pump is frozen, the use of the Pump will be affected. So how do you keep the pump from freezing?

https://www.woqfirepump.com/portable-fire-pump-product/

1. Drain water from Portable Fire Fighting Pump and add water when using.

2. If the equipment freezes, pour hot water or boiling water into the pump to internalize the ice, or heat the pump shell.

3, put the fire pump in normal temperature environment.

4. Choose an insulation type Portable Fire Fighting Pump and add steam or hot water to the insulation layer.

When it comes to winter, do the above measures for the fire pump to reduce icing and prevent the pump from being frozen. The pump is more efficient in warm conditions, but its function can be affected if it freezes.

Filter element in the fire pump, can play a role in filtering dirty things, because of long time and dirty things contact, so clean the filter element has become our daily maintenance of the pump. Do you know how to clean the filter element? Fire pump manufacturers tell you:

1, the filter shell of the fire pump is separated from its head, and the knob bolt can be loosened. Do not lose the rubber sealing ring and fibrous gasket.

2, remove the spring, felt gasket and paper core, be careful, be sure to be careful.

3. There are a lot of dust and dirt accumulated in the folding seam of the filter element of the fire pump. First, remove the dust here, and the remaining dust falls down through flat patting.

4. Clean or new filter elements and install them back in the opposite direction of disassembly.

Users may feel that the filter element is not very easy to clean, in fact, according to the above method to clean the filter element in the fire pump effect is still ok, price comparison is suitable for various types of pumps, it is recommended to clean up the filter element, while cleaning the pump itself, improve work efficiency.


Post time: Jul-04-2022